15
-
The alignment of the wire fixture.
The troubleshooting chart provided in this manual provides possible causes and remedies
for sub-standard imprints.
TIMING CHART
Figure 8 Print Cycle Time
START UP
Place the
ON/OFF
switch in the
ON
position to start the KIP-20. The temperature
controller supply the power to heating element to heats the typewheel, and when the
typewheel reach normal operation temperature, the machine is ready to operate.
The KIP-20 begins marking when the host machine starts and sends a print pulse.
SHUT DOWN
At the end of the operating day or during an extended changeover, the wire-marking
machine may be shut down. Place the
ON/OFF
switch in the
OFF
position.
Summary of Contents for KIP-20
