KINGSLEY BATE
Fine Garden Furniture
ASSEMBLY INSTRUCTIONS FOR THE PV-73/96
TABLE TOP
LEG STRETCHER
TABLE BASES
HARDWARE
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.
NOTE: During assembly of the furniture please match all joints with the corresponding
letters or numbers stamped on the furniture.
ASSEMBLY OF THIS ITEM IS A TWO
PERSON PROCEDURE.
STEP-II
Set LEG STRETCHER upside down as shown in photograph and slide corresponding
TABLE BASE into position gently. Slide a split washer followed by a flat washer over 1 of
the Knock Down Bolts provided and secure with wrench provided.
NOTE:
Take care not
to over-tighten KD Bolts and DO NOT use power tool. Use of power tool could result in
damage to threaded inserts.
Repeat procedure with opposite TABLE BASE.
