STEP-III
Place the TABLE TOP face down on a clean, soft surface and carefully fit the completed
TABLE BASE ASSEMBLY onto the TABLE TOP as shown in photographs (TABLE TOP
and TABLE BASE ASSEMBLY ARE STAMPED FOR EASY LINE UP). Again, slide the
split washers, followed by the flat washers onto the Knock Down Bolts provided and lightly
tighten with wrench key provided. Once all bolts have caught thread you can tighten down
all the way.
NOTE:
DO NOT ROLL TABLE OVER TO UPRIGHT. TABLE SHOULD BE
LIFTED, ROTATED AND THEN SET DOWN.
IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY BATE FURNITURE, PLEASE CONTACT KINGSLEY BATE CUSTOMER
SERVICE AT 703-361-7000. WE THANK YOU FOR CHOOSING OUR FURNITURE.
* KINGSLEY BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY
7200 Gateway Court, Manassas, Virginia 20109
Phone: 703-361-7000, Fax: 703-361-7001
