KINGSLEY - BATE
Fine Garden Furniture
ASSEMBLY INSTRUCTION FOR THE NT - 10
SEAT SECTION LEFT END FRAME RIGHT END FRAME
* NOTE
A TENON
B MORTISE HOLE
BOTTOM STRETCHER
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.
NOTE
: During assembly of furniture please m atch joints with the corresponding letter or
numbers.
STEP-II
Fit the BOTTOM STRETCHERS and
SEAT SECTION into the LEFT END
FRAME mortises. If necessary, gently
rock the leg assem bly while pushing
tenons into m ortises until joints fit
snugly. Fit the RIGHT END FRAME
mortises to the BOTTOM STRETCHERS and SEAT SECTION.
STEP-III
Insert all dowels as shown on assembly diagram.
IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE
DEALER NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU
FOR CHOOSING OUR FURNITURE.
* KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
0
IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY
7200 Gateway Court, Manassas, Virginia 20109
Phone. 703-361-7000, Fax. 703-361-7001
