Kingsford OG2001901-KF Owner'S Manual Download Page 15

OG2001901-KF English

                                                                                              15                                                                                                                 

191017Ver1

 

 

Step 4 

When charcoal is burning strong again, 

wear oven mitts / gloves

 and carefully return charcoal grid to grill 

body with lifter. Extinguish any hot ashes, coals or embers which may have fallen from the grill or beneath 
and around grill. 

 

AFTER-USE SAFETY 

 

WARNING 

 

 

Always

 allow grill and all components to 

cool completely

 before handling. 

 

Never leave

 coals and ashes in grill 

unattended

. Make sure coals and ashes are 

completely extinguished

 

before removing

 

Before grill can be left unattended, 

remaining coals and ashes must be removed from 

grill. Use caution to protect yourself and property. Place remaining coals and ashes in a 

non-combustible metal container and completely 

saturate with water

. Allow coals and 

water to remain in metal container 24 hours prior to disposing. 

 

Extinguished 

coals and ashes

 should be placed 

a safe distance from all structures and 

combustible materials

 

With a garden hose, 

completely wet surface beneath and around the grill

 to extinguish 

any ashes, coals or embers which may have fallen during the cooking or cleaning process. 

 

Cover and store

 grill in a protected area away from children and pets.

 

 

Proper Care & Maintenance 

 

Cure your grill periodically throughout the year to protect against excessive rust. 

 

To protect your grill from excessive rust, the unit must be properly cured and covered at all     
times when not in use. 

 

Wash cooking grate and charcoal grid with hot, soapy water, rinse well and dry. Lightly coat grill   
with vegetable oil or vegetable oil spray. 

 

Clean inside and outside of grill by wiping off with a damp cloth. Apply a light coat of vegetable   
oil or vegetable oil spray to the interior surface to prevent rusting. Do not coat charcoal grid. 

 

If rust appears on the exterior surface of your grill, clean and buff the affected area with steel   
wool or fine grit emery cloth. Touch-up with a good quality high-temperature resistant paint. 

 

Never apply paint to the interior surface. Rust spots on the interior surface can be buffed,     
cleaned, and then lightly coated with vegetable oil or vegetable oil spray to minimize rusting. 

 

 
 
 
 
 
 

 

Summary of Contents for OG2001901-KF

















Reviews: