STEP 16.
Insert grease clip (10) up through
large hole in bottom of grill body.
Engage clip end in small hole.
Position an empty metal container
(not included) on grease clip so it
rests snugly.
The container is needed to collect
grease run-off.
Note:
Clip may require adjustment
to fit diameter of container.
GRILL IS READY FOR USE.
STEP 15.
Place cooking grates (19) in grill
body.
Grate lifting tool (20) may be used as
shown.
12
Carefully reposition grill as
shown in Figure D.
STEP 5.
Set storage shelf (4) on shelf brackets
located on the inside of each leg.
N
No
otte
e:: Shelf may require tilting to
place in position.
Secure to each leg with bolt (A) and
hex flange nut (B) as shown.
Note:
Do not over tighten, dampers
should move freely.
STEP 6.
Attach air damper (9) on inside of
grill body as shown and fasten with
bolt (A) and hex lock nut (J).
Repeat this step on opposite end.
Figure D
7
