Kingsford 10040406 Assembly, Care & Use Manual Download Page 6

10

5

STEP 4.

Insert 2 stabilizing screws of ash can spacer
ring (8) through keyholes in cart grill base (2)
and twist as shown.  Secure with phillips
head screw (B) and hex lock nut (C).

Place heat insulation washers (I) on base
hinges (G) as shown.  Secure to grill base
using phillips head screws (A) and aluminum
flat washers (F).

Carefully position assembled cart as
shown.

Do not tighten screws all the way.
Side shelves may need to be adjusted
when  attached.

STEP 3.

Attach right side shelf (21) to axle leg frame
(4) using phillips head screws (A) and 
aluminum flat washers (F) as shown.

Tighten all screws.

Repeat step on other side attaching left side
shelf (20) to leg frame (3).

Set cart aside.

GRILL OPERATION CAUTIONS

• Avoid bumping or impacting grill.

• Keep your hands, hair and face away from burning charcoal.

• This grill has an open flame.  Be careful of loose hair and clothing during operation.  They may

catch fire.

• Use protective gloves when handling this grill or working with fire.  Use protective gloves or

long, sturdy fireplace tools when adding wood or charcoal.

• Do not allow anyone to conduct activities around this grill during or following its use until the

unit has cooled.  This grill is HOT during operation and remains HOT for a period of time
following its use.

• Fatty foods like hamburgers can have excess grease that can cause flare ups.  When cooking

fatty foods, use caution when opening lid and during cooking to avoid being burned.

• Be careful when removing food from grill.  All surfaces are HOT and may cause burns.  Use 

protective gloves or long, sturdy cooking tools.

• Never use glass, plastic or ceramic cookware on this grill.

• The use of alcohol, prescription or non-prescription drugs may impair the user’s ability to

properly assemble or safely operate this grill.

• Grill lid and base are HOT while in use and during cooling process.

• Do not remove ash can while ashes and charcoal are HOT.

• Air dampers are HOT while the grill is in use and during cooling; wear protective gloves when

adjusting.

• Never overfill charcoal grate.  This can cause serious injury as well as damage the unit.

• Only use charcoal lighting fluid, never use gasoline, alcohol or other highly volatile fluids to

ignite the charcoal.  These fluids can explode causing injury or death.

REMINDER:
NEVER OPERATE THIS GRILL UNDER ANY OVERHEAD CONSTRUCTION.  MAINTAIN A MINIMUM
DISTANCE OF 10 FEET FROM OVERHEAD CONSTRUCTION, WALLS OR RAILS.
SEE DIAGRAM BELOW.

Wall

Rails

Overhead 
Construction

10 feet

10 feet

Stabilizing Screws

Keyholes

4

21

A

2

C

B

A

F

I

G

8

F

Summary of Contents for 10040406









Reviews: