www.kingsbottle.com
7
D. INSTALLATION OF BUILT-IN CELLAR (MINIMUM CAVITY SPACE REQUIRED)
The cutout dimension illustrated in figure (D) allows for door swing and access to the pull-out shelves when installed as a built-in appliance.
If installing between frameless cabinets, a 1.5” wide filler strip or side panel may be needed on hinge side.
The filler strip will act as a spacer between the appliance case and adjacent cabinet door swing.
PART III
INSTALLATION INSTRUCTIONS
INSTALLATION
+ 1.5” (mini)
+ 1.5” (mini)
+
1.5” (mini)
Figure D
Note:
This model is designed as free standing unit. If you want to use as built-in installation, it’s necessary to
consider leaving at least 1.5” for each side, specially consider the air flow exchange at the rear side. Also
need to consider door swing, etc. Failure to allow minimum clearance will void all warranties.
Failure to allow minimum clearances will void all warranties
C. INSTALLATION OF FRONT GRILL
COMPRESSOR WINE CELLAR
