KingsBottle KB110 Series, User Manual

Page: 5 / 16

PART III INSTALLATION INSTRUCTIONS
INSTALLATION
MODEL WIDTH DEPTH HEIGHT NOTE
KB110 494 mm 595 mm 841 mm
This free-standing model can be built in to cabinetry if adequate
ventilation is supplied. Allow a minimum of 30mm on either side,
80mm at the rear, and 30mm on top.
KB152 595 mm 600 mm
860mm( Unit comes with additional
8mm feet that drop the units
height
to 848mm if required )
These front-venting models can be built in to cabinetry. Builders should
allow an additional 20mm either side of the unit, plus 40mm behind the
unit and 20mm on top. These additional spaces allow units to be
placed in position easily, and without power cords being damaged.
This also allow hot air that is vented from the front to rise quickly and
clear the cool air intake manifold. These clearances help to keep
power consumption to a minimum and prolong the life of
your
refrigerator
KB308 598 mm 685 mm 1408 mm
KB405 598 mm 685 mm 1821 mm
KB405 KB308 KB152 KB110
!
www.kingsbottle.com.au ! 5