PA G E 1 3
P R O G R A M M I N G M A N UA L
K L A - 1 1 0
Double click local area connection.
In the ‘General’ tab, look down the table of connections,
under the heading ‘THIS CONNECTION USES THE FOLLOWING
ITEMS:’ choose ‘INTERNET PROTOCOL (TCP/IP)’ then click on
‘PROPERTIES’.
A new window will appear.
NOTE:
If your computer is set up to obtain an IP address
automatically then you won’t be able to connect directly to the
Kingray Professional Series. You must make sure you have a static IP
address set up as below to connect to the system.
Under the ‘General’ tab, enter in the following IP settings (other
IP addresses can be used providing it is in the same range as the
KLA110 eg 192.168.xx.xx).
Click OK.
Then click OK again.
Open up your browser and type in the default IP address
192.168.1.1 and press enter.
You should now have access to the Kingray Professional
Headend!
