23
Installation procedure
Step 1: Install upper guide rail
Location
upper guide rail
sponge
1. Tear off the paster at back side of sponge, and then align it at the bottom
2.
models. Therefore, this step can be omitted.)
edge of upper guide rail to stick the sponge at the bottom of upper guide
rail. (The sponge has been stick on the upper guide rail for some models.
Therefore, this step can be omitted.)
How to install:
Choose the installation space ac-
cording to the following diagram.
Choose a location where there are no
any obstacle surrounding the unit,
and the plug is accessible.
Over
500mm
1500 mm
500mm
300mm
300mm
The distance between the air conditioner
and the around obstacles should meet the
requirement as below: over 300mm
(upper side), over 500mm (left side),
over 500mm (right side), over 1500mm
(front side) and over 500mm (rear side).
