12
EN
I. Mode selection ( / button)
HOW TO USE
Quick start
CONTROL PANEL
When first use the machine, there will be some slight smell. It is normal. The smell will
disappear after heater working for an hour.
Button
MENU
OK
/
Function
Standby
Short press to enter setting menu: 1. Time setting; 2. program modes
setting; 3. Window detection function.
Press for 3 seconds, activate/ inactivate keyboard lock.
Confirm button
Under working status: shift working mode (Comfort/Eco / Program modes
or Fil Pilote/ Anti-freeze)
Under setting status: shift options by left and right
Under working status: adjust temperature
Under setting status: shift options by up and down
/
1. For the first time you use the device, after you connect to the power supply and
after that the clock is set, refer to the time setting instruction in "setting menu" . The
device will be in standby mode, and you can press the standby button to enter
comfort mode.
Notes: In case of power failure, the unit keep in memory only the parameters,
temperature and operating mode. When power is restored, the clock should be
adjusted again to operate the program modes properly.
Press / to toggle among the modes: comfort / Eco / Program mode or Fil
Pilote / Anti-freeze , the icon of the selected mode will appear on the bottom part
of the screen.