28
FPLMP129
FPLMP129
In
more
detail
. . .
12
1
3
2
2
15
12
WARNING!
Ensure that the lever (
15
) engages between two of the grooves!
Primer
The primer (
9
) is positioned in the front of the air filter case (
10
). Push the primer
3
times
before starting the cold engine (Fig.
13
).
9
13
10
General operation tips
1. Before each use:
> Check the product and accessories for damage and whether they are properly
fixed. Do not use the product if it is damaged or shows and signs of wear and
tear. Take care of any problem you find or have the product checked by qualified
specialist.
> Check the fuel and oil level. Refill if necessary.
> Look around and underneath the product for signs of oil or fuel spill.
> Check each control for proper operation.
> Check blades for wear.
> Make sure that all bolts and screws are tightened.
> Check if the air filter (
10a
) is clean.
2. Always push the product using the upper handle bar (
2
). Keep the handle bar dry
and free from lubricant to ensure safe support.
3. Ensure that the air vents (
7
) are always unobstructed and clear. Clean them if
necessary with a soft brush. Blocked air vents may lead to overheating and damage
the product.
4. Stop the engine immediately if you are disturbed while working by other people
entering the working area. Always let the product come to a complete stop before
leaving the product unattended.
5. Do not overwork yourself. Take regular breaks to ensure you can concentrate on
the work and have full control over the product.
Starting/Stopping
WARNING!
Before starting, place the product on a stable, level surface free
of high grass! Clean the underside of the product!
Start the engine carefully according to instructions. Keep your feet well away
from the blade (
25
)!
Do not tilt the product when starting the engine.
1. Press the primer (
9
)
3
times (Fig.
14
, step
1
).
2. Stand behind the upper handle bar (
2
).
3. Pull the brake clutch (
1
) towards the upper handle bar (
2
) and hold it in position with
one hand–– (Fig.
14
, step
2
).
4. Pull the recoil starter handle (
22
) lightly until you feel resistance then pull it rapidly.
Do it repeatedly until the engine starts (Fig.
14
, step
3
).
5. Rest the recoil starter handle (
22
) onto the hook (
21
) located on the right-hand side
of the upper handle bar (
2
).
Product functions
3663602423270-GB-V04.indd 28
27/9/2018 10:06
