Kingfisher 3663602423270 Page 44 Original Instructions Manual Download

Page: 44 / 46

FPLMP129

detail

. . .

Recycling and disposal

1. Old products are potentially recyclable and do not, therefore, belong in your household

rubbish. You are requested to assist us and our contribution to saving resources

and protecting the environment by handing in this product to an equipped collection

centre (if there is one available).

2. Petrol, oil, used oil, a mixture of oil and petrol and objects soiled with oil e.g. cleaning

cloths do not belong in the household rubbish. Dispose of oil-contaminated items in

accordance with the local guidelines and hand them in at recycling centres.

3. The product comes in a package that protects it against damage during shipping.

Keep the package until you are sure that all parts have been delivered and the

product is operating properly. Recycle the package afterwards.

Guarantee

This product carries a guarantee of

12 months

starting from the day of purchase. Please

retain your receipt as a proof.

This guarantee specifically excludes losses due to:

- Normal wear and tear, including accessory wear

- Overload, misuse or neglect

- Failure of consumable items (such as batteries)

- Repairs attempted by anyone other than an authorised agent

- Accidental damage caused by foreign objects or substances

- Lack of routine maintenance

- Failure to follow manufacturer’s guidelines

- Loss of use of the goods

Due to continuous product improvement, we reserve the right to change the product

specification without prior notice.

This guarantee does not affect your statutory rights.

For any inquiries relating to the guarantee,

contact your retailer: If you purchased this

product in B&Q store or website, then

call 0333 014 3357. If you bought this

product in SFX outlet or website then call

03330 112 112.

After Sale Service Please Call

Hotline : 01904 727514

Email: [email protected]

SAN: 0380401814ZB

Mon-Fri

9am-5pm

Sat-Sun

11am-4pm

Kingfisher International Products Limited

3 Sheldon Square

London W2 6PX

United Kingdom

Declare that the product

Petrol Lawnmower 129 cm

FPLMP129

Serial number: from

000001

999999

Complies with the essential health and

safety requirements of the following directives:

The Machinery Directive

2006/42/EC

EN ISO 5395-1:2013+A1:2018

EN ISO 5395-2:2013+A1:2016+A2:2017

The EMC Directive

2014/30/EU

EN ISO 14982:2009

The Outdoor Noise Directive

2000/14/EC

2005/88/EC

Measured Sound Power Level:

92.7

dB(A)

Guaranteed Sound Power Level:

dB(A)

EN ISO 3744:1995

;

ISO 11094:1991

Certificate registration number: GB/1067/6452/18 Issue 1

Test report No.: SHES180700812361

Conformity assessment procedures: Annex VI of the directive

Notified body: NB 1067, AV Technology LTD, Unit 2 Easter Court, Europa

Boulevard, Warrington, Cheshire, WA5 7ZB, United Kingdom

The Regulation of Non-Road Mobile Machinery Emissions (EU) 2016/1628,

and its supplemented regulations

Engine model: SE475

Authorised Signatory and technical file holder:

Name/Title: Lisa Davis/Group Quality Director

Date: 30.08.2018

Kingfisher International Products Limited

3 Sheldon Square London W2 6PX United Kingdom

Recycling and disposal/Guarantee

3663602423270-GB-V04.indd 44

27/9/2018 10:07

Summary of Contents for 3663602423270















































Search results

Summary of Contents for 3663602423270

Reviews:

Related manuals for 3663602423270

Brands by name

Popular brands

Kingfisher 3663602423270, Original Instructions Manual

Search results

Summary of Contents for 3663602423270

Reviews:

Related manuals for 3663602423270

Brands by name

Popular brands