Bios Setup
3-09
Advanced
This section is used to configure the serial port functions.
Case Open Beep
Set this field to Enabled to allow the system to alert you of a chassis intrusion event.
Watchdog
This field is used to enable or disable the Watchdog Timer function.
AC Power Loss
Turns Off
When power returns after an AC power failure, the system’s power is off. You must
press the Power button to power-on the system.
Turns On
When power returns after an AC power failure, the system will automatically
power-on.
Former-Sts
When power returns after an AC power failure, the system will return to the state
where you left off before power failure occurs. If the system’s power is off when AC
power failure occurs, it will remain off when power returns. If the system’s power is on
when AC power failure occurs, the system will power-on when power returns
Super IO Configuration
Set Parameters of Serial
Port 0 (COMA)
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Super IO Con
fi
guration
Super IO Chip
Serial Port 0 Con
fi
guration
Serial Port 1 Con
fi
guration
Case Open Beep
Watchdog
AC Power Loss
Advanced
Winbond W83627DHG
[Disabled]
[Disabled]
[Turns Off]
→ ←:
Select Screen
↑↓:
Select Item
Enter:
Select
+/
-:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Exit
ESC:
Exit
