DVD Duplicator Series
©2005 Kingdom, Inc. All rights reserved
Ver: 1.0
Page - 26 of 34
User’s Guide
Chapter 7 Setup Options
Overview
The
11.Setup
function contains options that allow the user to change the original
default settings. As there are various settings that control the duplicator’s operation, we
suggest using the preset default settings for optimal operation. The options are
described in this chapter for your reference.
Language
This option allows you to select the language that appears in the LCD Panel. The
options are: English, Spanish.
CD Burn Speed
This option allows you to change the burn speed (depending on the CD-RW maximum
speed support).
DVD Burn Speed
This option allows you to change the burn speed (depending on the DVD-RW maximum
speed support).
Read Speed
The option allows you to control the read speed of the DVD-RW (depending on the
CD-ROM maximum speed support).
Auto Start Drive
This option controls whether or not the DVD writers will auto start to copy or if the DVD
writers will test for the blank discs. The default setting is OFF.
Startup Menu
This option allows you to select which function will appear at system startup. The default
is the
Copy
function.
Auto Verify
This option controls the auto verify of the target DVDs, which verifies if they can be read
correctly in the DVD-RW drive after copying. The default setting is OFF
Auto Compare
This option controls the auto compare of the data between the Master DVD and the
target DVDs after a copy operation. The default setting is OFF.
Auto Prescan
This option controls the auto prescan of the master disc to see if it can be read correctly
and it tests the reading speed. The default setting is OFF.
Eject Disc
This option controls the ejection of the discs by the DVD writer. Three settings are
available: the default setting is the “Eject Good Only” setting, which will only eject the
passed discs automatically and leave the failed ones in the DVD writers; the “Eject All
Disc” setting will eject all discs, whether or not they passed or failed; the “Do Not Eject”
setting causes all the discs to remain in the DVD writers when the job is done and the
user will have to eject the discs manually.
