DVD Duplicator Series
©2005 Kingdom, Inc. All rights reserved
Ver: 1.0
Page - 15 of 34
User’s Guide
To select one of the DVD-RW drives as the source, press the down arrow button to cycle
through the available source drives:
4. Press the
ENT
button to make your selection. The LCD panel displays a confirmation of
your selection. Depending on your selection one of the next three messages may be
displayed:
5. Press the
ENT
button or the
ESC
button to return to redisplay the Select Source function.
The
Copy
function will reflect the source as explained in step 1.
6. If you have selected the hard drive as your source, you must make sure to specify which
partition in the hard drive you intend to use as your source, using the Image function.
This procedure is explained in the next section.
