sterilize steam so that it can reach your skin with
purest most effective condition.
4.Adjust the steaming angle for your
convenience.The steam is in high temperature, to
avoid burning, keep your face at least 25 cm (9.8’’)
away from the steam outlet.
5.A full tank of water can be run for about 18-20
minutes. It should be used once a day, 10 min
steaming time for once , a maximum of 2 times for
one day. 2~3 times for normal skin type and once for
sensitive skin type for a week.
6.Press the power switch again to turn off the
steamer after 10 minutes spraying.
(3)After Use
1.Unplug the plug from the power outlet. Do not tilt,
shake, or transport the main unit within 10 minutes
after use. Place the steamer to cool down for at
least 10 minutes.
2.Take out the water supply tank and unscrew the
cap. Wipe away any water on it.
3.Discard the leftover water from the install part for
the water tank(as shown on the diagram).When
disposing of the water, hold the main unit so that
your hands are not burned by the hot water. Failure
to do so may result in burns.
4.Wipe away any water on the surface of the main
unit.
(1)Kindly remind
1.An automatic power-off system is set to prevent
water from running out of for avoiding the dry
burning accident and ensuring safety.
2. After using, please discharge leftover water of the
water supply tank and the main unit.
3. Excessive use is detrimental to the skin. Basic
skin care and moisturizing with lotion are required
after using the steam. Not performing skin care after
using the steam may cause the moisture in your skin
to evaporate easily, drying out your skin.
4.When the remaining water is at a low level, the
steam is released in a discontinuous way. This is not
a malfunction.
5. If there is no water in the water supply tank, no
steam will emit from the steam outlet. Please turn off
the appliance.
