The KING UC1000 Controller is factory preset for
DISH HD and SD
(satellites
110, 119 and 129).
If this is your desired service option, you do not need to configure your
antenna. Go to section 4.
If you wish to use a different DISH service option, or if you have DIRECTV or
Bell TV service, you will need to reconfigure the antenna as shown below.
Press and
IMMEDIATELY RELEASE
POWER
to turn on
controller.
Wait for lights to stop flashing and COAX CONNECTION
light to stay on (about 10 seconds).
1
6
Press and
HOLD
SCAN
until
SCAN PROGRESS
lights flash
(controller enters service mode).
About 10 seconds.
2
Press and
IMMEDIATELY RELEASE
SCAN
repeatedly to
scroll thru service options.
Match up lights on controller to lights in chart on opposite
page for desired service.
3
Press and
HOLD
SCAN
until SCAN PROGRESS lights turn
off (controller saves service setting).
About 3 seconds.
4
Go to section 4.
Press and
HOLD
POWER
until controller turns off.
About 3 seconds.
5
ANTENNA CONFIGURATION
3
