This unit is shipped from the factory with the alarm feature in the ON mode. If
you wish to have the alarm in the ON mode, you can skip this section and go
to section 3. To disable the alarm, follow the instructions below.
ALARM MODE
2
Press and
IMMEDIATELY RELEASE
POWER
to turn on
controller.
Wait for lights to stop flashing and COAX CONNECTION
light to stay on (about 10 seconds).
1
• Single Beep (beep...beep...beep)
Alarm is
OFF
.
• Double Beep (beep beep...beep beep) Alarm is
ON
.
Simultaneously press and
HOLD
POWER
and
SCAN
until controller begins beeping.
2
Press and
IMMEDIATELY RELEASE
SCAN
repeatedly to
toggle between the on and off modes.
Beep pattern will change to indicate new mode.
3
When alarm is in desired mode, press and
HOLD
SCAN
until
COAX CONNECTION light stops flashing.
Controller saves alarm setting.
4
6
Go to section 3.
Press and
HOLD
POWER
until controller turns off.
About 3 seconds.
5
