SPRAYING
As long as there is enough water in the water tank, you may use the spray button at any
temperature setting during steam or dry ironing.
Press the spray button several times to activate the pump while you are ironing.
STEAM IRONING
Set the temperature control dial to the ”..” or “…” position.
Set the variable steam control to the desired position.
CAUTION: Avoid coming in contact with ejected steam.
DRY IRONING
The steam iron can be used on the dry setting with or without water in the water tank, it
is best to avoid having the water tank full while dry ironing.
Turn the variable steam control to the minimum position.
Select the setting on the temperature control dial best suited for the fabric to be ironed.
CAUTION: If the steam iron has been used for a long time, it is hot and there is no water.
Do not refill it with water until the steam iron cools down.
BURST OF STEAM
The burst of steam feature provides additional steam for removing stubborn wrinkles.
Turn the temperature control to ”..” or “…” position.
Turn the variable steam control to the maximum position
Press the powerful steam button to release the burst of steam.
NOTE: To Prevent water leakage from the soleplate, do not keep the powerful steam
button pressed for more than 5 seconds.
WHEN YOU FINISHED IRONING
Set the temperature dial to the minimum position.
Remove the main plug from the wall socket.
Stand the iron on heel rest.
