background image

 

when moving the cart/apparatus combination to avoid injury from tip-over. 

13.  Unplug the apparatus during lightening sorts or when unused for long periods of time. 

14.  Refer all servicing to qualified personnel. Servicing is required when the apparatus has 

been damaged in any way,such as power-supply cord or plug is damaged. Liguid has 

been spilied or objects have fallen into the apparatus,the apparatus has been exposed to 

rain or moisture does not aperate normally, or has been dropped. 

15.  This appliance should not be exposed to dripping or splashing water and no objects filled 

with liquids such as vases should be placed on apparatus. 

16.  The AC socket it is used to unplug the unit power cord and it must be easily accessible 

every time it is necessary. 

17.  No flames objects, like candles, must be placed on the unit. 

18.  Ventilation warning: The normal ventilation of the product shall not be impeded for 

intended use. Make sure there is enough space above and besides the holes. Install the 

unit in a place with suitable ventilation openings (around 7cm) . 

 

 

FCC Notice: 

 

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates 
uses and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures:   

 

---Reorient or relocate the receiving antenna. 

---Increase the separation between the equipment and receiver.     

---Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected. 

---Consult the dealer or an experienced radio/TV technician for help. 

 

 

WARNING:

  Changes or modifications not expressly approved by the party responsible for 

compliance could void the user's authority to operate the equipment.   

 

This equipment complied with FCC radiation exposure limits set forth for an uncontrolled 
environment. This equipment should be installed and operated with minimum distance 20cm 
between the radiator & your body. 

Summary of Contents for KP686BT










Reviews: