KING PROFIT TRADING KP686BT Instruction Manual Download Page 3

 

unplugging it from power source to completely switch it off. 

9) 

Do not plug/ unplug the power plug into/from an electrical outlet with wet hands. 

10) 

If the power plug does not fit into your outlet, do not force the plug into an electrical 
socket if it does not fit. 

11) 

Use replacement parts, which are specified by the manufacturer. 

12) 

Install the unit in accordance with the manufacturer’s instructions. 

13) 

Place the unit where there is good ventilation. Place the system on a flat, hard and stable 
surface. Do not expose to temperatures above 40°C. Allow at least 30 cm clearance from 
the rear and the top of the unit and 5 cm from each side. 

14) 

Press the buttons of the unit gently. Pressing them too hard can damage the unit. 

15) 

Dispose of used batteries in an environmental-responsible manner. 

16) 

Always ensure that the product is unplugged from the electrical outlet before moving or 
cleaning. Clean it with dry cloth only. 

17) 

Unplug the product during lightning, storms or when it will not be used for long periods of 
time. 

18) 

This product has no user-serviceable parts. Do not attempt to repair this product yourself. 
Only qualified service personnel should perform servicing. Take the product to the 
electronics repair shop of your choice for inspection and repair. 

19) 

NEVER let anyone, especially children, push anything into holes, slots or any other 
openings in the unit’s casing as this could result in a fatal electric shock. 

20) 

Don’t mount this product on a wall or ceiling. 

21) 

Do not place the unit near TVs, speakers and other objects that generate strong 
magnetic fields. 

22) 

Do not leave the unit unattended when it is in use. 

NOTE: To disconnect the system completely if it not to be used for a long time, remove the AC 
power plug from the wall outlet.

 

 

1. 

Read these instructions. 

2. 

Keep these instructions. 

3. 

Heed all warnings. 

4. 

Follow all instructions. 

5. 

Do not use this apparatus near water. 

6. 

Clean only with dry cloth. 

7. 

Do not block any ventilation openings. Install in accordance with the manufacture’s 

instructions. 

8. 

Do not install near any heat sources such as radiators, heat registers, stoves, or other 

apparatus (including amplifiers) that produce heat. 

9. 

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug 

Has two blades with one wider than the other. A grounding-type plug has two blades and a 

third grounding prong. The wide blade or the third prong are provided for your safety. If the 

provided plug does not fit into your outlet. Consult an electrician for replacement of the 

obsolete outlet. 

10.  Protect the power cord from being walked on or pinched particularly at the plugs, 

convenience receptacles, and at the point where it exits from the apparatus. 

11.  Only use attachments/accessories specified by the manufacturer. 

12.  Use only with the cart, stand, tripod, bracket, or table specified by the

 

 

manufacturer,or sold with the apparatus. When a cart is used, use caution 

Summary of Contents for KP686BT










Reviews: