Page 15 of 21 King Pigeon Hi-Tech. Co., Ltd. Ver 1.0
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
8.SMS commands & APP (Recommend to use the APP)
Notice:
1.
The default Password is
1234
.
2.
The unit cannot support PIN Code Protected SIMCard.
3.
You can program the GSM unit with SMS commands using your phone.
4.
Remember that commands must be
CAPITAL LETTERS
. It is PWD not pwd, CAP not Cap etc. Don't add
spaces or any other character.
5.
The
pwd
in the commands is means the password, when you use it, please in stand of it by the digital
number; the capital letters
PWD
is the command letter, use PWD directly.
6.
In some GSM operators they use different SMS parameter; the units can’t return the SMS confirmation in
some gsm operators, but it can performance the functions correctly. Also, you can try to add the country
code before the number, see the below settings:
7.
If the password is correct but the command is incorrect, the S264/5/6 will return:
SMS Format Error,
Please check Caps Lock in Command!
So please check the Command, or add the country code before
the telephone number or check the input is in ENGLISH INPUT METHOD and CAPS LOCK. If password
incorrect then will not any response SMS.
8.
Once the GSM Unit received the SMS Command, will return SMS to confirmation, if no SMS return, please
check your command or resend again.
9.
The SMS commands that you will certainly use in the GSM units are the following:
**SMS Commands For Program and Operation the S264/5/6**
1)
Setup the S264/5/6 SIMCard Number(Max 21 digits)
This number is used for automatically adjust the time from GSM Operator.
Command
Return SMS
Example
PWD+TEL+SIMCard #
Set success!
1234TEL008613570810254#
2)
Setup S264/5/6 system Time
If you GSM Operator cannot provide the time source then must setup the system time after power on.
Otherwise, the S264/5/6 will run it at mistake time. If you GSM Operator can provide time source, then no
need to setup this time, but must setup the SIMCard number as 1) required.)
Command
Return SMS
Example
Setup
PWD+DyymmddThhmm
xx(Y)XX(M)XX(D)xx(H)X(M)
1234D20170510T1258
Inquiry
PWD+D
xx(Y)XX(M)XX(D)xx(H)X(M)
1234D
3)
Modify Password(4digits, Default is: 1234)
Command
Return SMS
Example
PWD
＋
P
＋
new password [new password],This is the New Password,
1234P4321 stands for change
For example:
E.g.: the country code is
0086
, or
+86
.
The user cell phone number is
13600000000
and has been assigned as a SMS Alert number, the simcard
number in the panel is
13512345678
.
When you setup the number as the authorized number, please setup as 008613600000000 or
+86136000000000. Not 13600000000.
