King Pigeon BL280 User Manual Download

Page: 2 / 52

Page

2 of 52

King Pigeon Communication Co., Ltd.

www.iot-solution.com

Wireless Data Acquisition System - LoRa Gateway BL280

Thanks for choosing King Pigeon Wireless Data Acquisition System LoRa Gateway BL280.

Reading this manual with full attention will help you quickly learn device functions and operation

methods.

Copyright

This user manual is owned by King Pigeon Communication Co., Ltd. No one is authorized to copy,

distribute or forward any part of this document without written approval of King Pigeon. Any violation

will be subject to legal liability.

Disclaimer

This document is designed for assisting user to better understand the device. As the described

device BL280 is under continuous improvement, this manual may be updated or revised from time

to time without prior notice. Please follow the instructions in the manual. Any telecommunication

service network issues or damages caused by wrong operation will be beyond warranty.

Revision History

Revision Date

Version

Description

Owner

July 28, 2021

V1.0

Initial Release

HEX

Summary of Contents for BL280





















































Search results

Summary of Contents for BL280

Reviews:

Related manuals for BL280

Brands by name

Popular brands

King Pigeon BL280, User Manual

Search results

Summary of Contents for BL280

Reviews:

Related manuals for BL280

Brands by name

Popular brands