17
Password Setting
Hold
【
UP
】
and
【
DOWN
】
buttons simultaneously for 2 seconds
to enter the normal setting state; then hold
【
UP
】
and
【
MODE
】
buttons simultaneously for 2 seconds to enter the power‐on
password setting state.
The display prompts “PAS.2”, indicating that you need to enter the
power‐on password. Press the
【
MODE
】
button to shift, and
increase/decrease the input value by
【
UP
】
/
【
DOWN
】
. After the
4‐digit password is entered, press the
【
MODE
】
key to confirm. If
the password is correct, enter the power‐on password user setting
interface, otherwise it will stay in the password input state. Hold
【
MODE
】
button to exit. The factory default is: 1234.
Password Use
By
【
UP
】
/
【
DOWN
】
to select Y/N. Y means that the power‐on
password is required, and N means that the power‐on password is
not required. Press
【
MODE
】
to confirm and enter the password
Summary of Contents for E5227-U LCD
Page 1: ...KING METER USERS GUIDE E5227 U LCD ...
Page 48: ...44 KING METER ...