MODEL MA-1020
Chisel capacity 1/4” - 1/2”
Chuck capacity 1/2”
Maximum chisel stroke 5”
Max. distance chisel to table (head extended) 5”
Under table hold down capacity 3-5/8”
Table size 13-3/8” x 5-3/4”
Fence size 13-3/8” x 2”
Speed 1,700 RPM
Motor 120V, 5 Amp., 1 phase, 60 Hz
Assembled dimensions (LxWxH)/weight 13-3/8” x 13-1/2“ x 29-1/2” / 55 lbs
gETTINg TO kNOW
YOUR HOLLOW CHISEL MORTISER
1-On/Off -Switch
. Turns the machine on or off.
2-Chisel Lock Screw
. Fixes the chisel and chisel adaptor to the head
casting flange.
3-Chisel & bit
.
4-Table Hold Down
. Holds your workpiece against the table during op-
erations.
5-Fence.
This adjustable fence moves back and forth and adequately
supports your workpiece.
6-Wooden Table
.
7-Depth Stop bushing and Lock knob
. This bushing acts as a depth
stop which limits the downward travel of the head.
8-Chuck Cover
. Open this cover or the other one on the opposite side
to gain access to the chuck.
9-Downfeed Lever.
Pulling this lever down brings the head and chisel
towards the workpiece.
10-Chisel and Hex. key Holder.
11-gas Cylinder.
Keeps the head in the raised position.
12-Fence Lock Handle
. Locks the fence in the desired position.
13-Fence Adjust knob.
Turn this knob to move the fence back and
forth.
14-Hold Down Lock knob.
15-1/2” Chuck.
16-Chuck key.
