electrIcAl InForMAtIon &
gettIng to know your MAcHIne
wArnIng!
ALL ADJUSTMENTS OR REPAIRS MUST BE DONE WITH THE MACHINE DISCONNECTED FROM THE POWER SOURCE.
FAILURE TO COMPLY MAY RESULT IN SERIOUS INJURY!
kc-8500c information. 5 HP cyclone dust collector.
240V single phase operation.
The KC-8500C Cyclone Dust Collector comes with a 5 HP 34 Amp. 240V single phase motor. This Cyclone Dust Collector doesn’t come
with an electrical plug. Contact your local electrician to install appropriate plug or hardwire the machine to the electrical panel.
wArnIng:
YOUR CYCLONE DUST COLLECTOR MUST BE CONNECTED TO A 220V-240V, 1 PHASE ELECTRICAL SUPPLY. FAILURE
TO CONNECT IN THIS WAY CAN RESULT IN INJURY FROM SHOCK OR FIRE.
groundIng
Your Cyclone Dust Collector must be properly grounded. If it should malfunction or breakdown, grounding provides a path of least resistance
for electric current, to reduce the risk of electric shock.
wArnIng:
IF NOT PROPERLY GROUNDED, THIS CYCLONE DUST COLLECTOR CAN CAUSE ELECTRICAL SHOCK, PARTICULARLY
WHEN USED IN DAMP LOCATIONS. TO AVOID SHOCK OR FIRE, IF THE POWER CORD IS WORN OR DAMAGED IN ANY WAY, HAVE
IT REPLACED IMMEDIATELY.
1. Locking caster
2. Drum
3. Drum plastic bag
4. Drum lid raising handle
5. Collector
6. Hose inlet- with caps (5 x 4” / 1 x 10”)
7. Impeller housing
8. Main motor
9. Canister auto-clean motor
10. Isolation panel
11. Vacuum pressure gauge
12. Magnetic switch & remote
13. Canister filter
14. Canister filter plastic bag
15. Drum vacuum pressure hose
MODEL KC-8500C
Air suction capacity (Real/Nominal) 2701/4400 CFM
Noise level reading at 36” 76 dB
Static pressure
(inch of water)
14.5
Steel drum capacity 54 gallon
Dust port opening 5 x 4” / 1 x 10”
Motor 5 HP, 34 Amp.
Voltage 240V, 1 phase, 60 Hz
Assembled dimensions (LxWxH) 35” x 65-1/2” x 91-5/8”
Weight 592 lbs
