background image

KING CANADA INC. DORVAL, QUÉBEC, CANADA H9P 2Y4

www.kingcanada.com

COPYRIGHT © 2007 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.

3 HP DUST COLLECTOR

WITH REMOTE POWER CONTROL SYSTEM

INSTRUCTIONS FOR KC-4043KWRC

Set up and operation

Remote control type ................................................................Infrared
Receiving angle ............................................................................120

0

Use ..................................................................................Indoors only

Electrical warning! Refer to the KC-4043C instruction manual for
electrical information. 

Turning the KC-4043KWRC On & Off using the Remote Power
Control System

The remote power control can be operated from the system panel (A)
Fig.1 hardwired to the dust collector motor or the remote control (B).
Plug the motor power cord into an appropriate power source and
press the “On” button (A-1). The dust collector will operate until the
“Off” button (A-2) is pressed.

Using the Timer feature

Once the dust collector is running, press the “Timer” button (A-3),
everytime you press the timer button the display number will increase
by one minute and can be set up to 99 minutes. Hold the timer button
to scroll quickly up towards 99 minutes, going past 99, minutes will
restart the minute count at zero (00). The dust collector will operate
for the amount of time set on the timer, once the zero (00) count is
reached, the dust collector will automatically stop. If you press the
“Off” button while the timer is engaged, the dust collector will turn off
and the timer will be reset to zero (00).

2-YEAR LIMITED WARRANTY FOR KING CANADA PRODUCTS

PROOF OF PURCHASE

Please keep your dated proof of purchase for warranty and servicing purposes.

REPLACEMENT PARTS

Replacement parts for this improved product are available at our authorized King Canada service centers across
Canada. Please refer to KC-4043C service manual for full diagrams and parts list.

LIMITED TOOL WARRANTY

King Canada makes every effort to ensure that this product meets high quality and durability standards. King
Canada warrants to the original retail consumer a 2-year limited warranty as of the date the product was
purchased at retail and that each product is free from defects in materials. Warranty does not apply to defects due
directly or indirectly to misuse, abuse, normal wear and tear, negligence or accidents, repairs done by an
unauthorized service center, alterations and lack of maintenance. King Canada shall in no event be liable for
death, injuries to persons or property or for incidental, special or consequential damages arising from the use of
our products. 

To take advantage of this limited warranty, return the product at your expense together with your dated proof of
purshase to an authorized King Canada service center. Contact your retailer or visit our web site at
www.kingcanada.com for an updated listing of our authorized service centers. In cooperation with our authorized
serviced center, King Canada will either repair or replace the product if any part or parts covered under this
warranty which examination proves to be defective in workmanship or material during the warranty period.

Figure 1

Summary of Contents for KC-4043C












Reviews: