53
EN
17.
Technical specifications
King Gates srl, in order to improve its products, reserves the right to modify their technical specifications at any time without prior notice. In
any case, the manufacturer guarantees their functionality and suitability for the intended purposes.
All the technical characteristics refer to a room temperature of 20°C (±5°C).
ROLLS technical specifications
ROLLS 700 NG
ROLLS 1200 NG
Type
Electromechanical gearmotor for the automatic movement of garage
doors for residential use, complete with electronic control unit
Pinion
Pitch 8, Z18
Peak starting torque [corresponds to the force neces-
sary to keep set the leaf in motion]
700N
1200N
Speed under no load [corresponds if "Fast" speed is
programmed]
0.17m/s
Operating limits
In general, ROLLS is suitable for the automation of sectional or overhead
doors which remain within the dimensions stated in table 1.
ROLLS power supply
230Vac (±10%) 50/60Hz.
Max. absorbed power
250W
300W
Insulation class
1 (a safety grounding system is required)
ROLLS courtesy light
LED
Flashing Light Output
for 1 flashing light (24V, 15W)
Working temp.
-20°C ÷ 55°C
Use in acid, saline or potentially explosive atmosphere
No
Protection class
IP 40 use only in indoor or protected environments
Dimensions
414 x 264 x h 110 mm
Guide technical characteristics
Code
Transmission type
Guide length
Door maximum height
Type of guide
Grb 3
Belt
3 m
2.40 m
1 x 3 m
Grb 23
3 m
2.40 m
2 x 1.5 m
Grb 35
3.5 m
2.90 m
1 x 3.5 m
Grb 4
4 m
3.40 m
3 m + 1 m
Grb 425
4.25 m
3.70 m
1 x 4.25 m
Resistance to traction
1200 N
Incorporated radio receiver technical specifications
Type
4 channel receiver for incorporated radio command
Frequency
433.92 MHz
Coding
King
Transmitter compatibility (*)
DigyPad, Stylo 4K, Myo C4, Novo TX and Novo Digy
No. of transmitters that can be memorised
170
Input impedance
50 Ω
Sensitivity
better than 0.5µV
Range of the transmitters
From 100 to 150m. The range can vary if there are obstacles or electromagnetic distur-
bances, and is also affected by the position of the receiving aerial
Outputs
/
Working temp.
-20°C ÷ 55°C
