King gates Modus 280, Manual

Page: 8 / 12

20
EN
4. Electrical connections
WARNING!
- An incorrect connection can cause faults or dangerous situations;
therefore, scrupulously comply with the indicated connections.
- Perform the connection operations with the power supply
disconnected.
To connect the gear motor proceed as follows:
01. Remove the gear motor cover as shown in Fig. 21 ;
A
C
B
Fig. 21
02. Loosen the cable gland of the gear motor and insert the
connection cables Fig. 22 ;
A
B
Fig. 22
03.
Bring the cables to the top of the motor near the control unit
Fig. 23 ;
Fig. 23
04. For how to connect the two motors, refer to the manual of the
“
Control unit
” supplied with the rest of the documentation;
05. After making all the electrical connections, replace the cover on
the gear motor.
To check the connections, the direction of rotation of the motor, the
displacement of the movement of the leaves and the adjustment of
the limit switch, refer to the instruction manual of the “
Control unit ”.
MASTER motor
SLAVE motor