KING CANOPY KMK1PCS Manual Download Page 3

Page: 3 / 8

FRAME ASSEMBLY

Step 1

Place all corners and pipe on the ground as shown. The swaged pipes are used to form the length of the

canopy.

Step 2

Start with the center and complete the center frame first. Then assemble each side.

NOTE: Attach the cover before inserting the legs.

Summary of Contents for KMK1PCS

Page 1: ... Ball Straps Foot Pads WARNING Keep all flame and heat sources away from this tent fabric Meets the flammability requirements of CPAI 84 It is not fire proof The fabric will burn if left in continuous contact with any flame source Distributed by PIC America LTD 1730 Five Points Lane Fuquay Varina NC 27526 1 800 800 6296 www kingcanopy com ...

Page 2: ...IST 5X8PCS 18 pc 1 3 8 diameter 68 Pipe 4X6PCS 6 pc 1 3 8 diameter 52 Swaged Pipe 3WPCS 6 pc 3 way connectors 4WPCS 3 pc 4 way connectors BALL50 50 pc Elastic ball straps T10203 1 pc Cover PFOOT 6 pc Foot pads ...

Page 3: ...orners and pipe on the ground as shown The swaged pipes are used to form the length of the canopy Step 2 Start with the center and complete the center frame first Then assemble each side NOTE Attach the cover before inserting the legs ...

Page 5: ... 3 and 4 way connectors and then connect the end leg pipes in the same way See illustration Step B Push the foot pads onto the bottom of each leg NOTE The foot pads are NOT for anchoring the canopy IMPORTANT Once the legs and cover are assembled your canopy will act like a kite in the wind It is imperative that the canopy anchors be installed NOW insert first insert second ...