INSTALLING THE LEG SKIRTS
Step 1
After the legs have been connected to the roof using the 3- and 4-way connectors and your canopy has been
securely anchored, attach the leg skirts using elastic ball straps and the grommets at the top of the unit.
(Make sure that the end walls are underneath the flared leg covers to minimize rain and other elements from
entering inside the canopy unit.)
Step 2
Next secure the flared leg covers over the 4 corners (and outside the walls) by fastening the fabric loops
located at the bottom of each leg skirt over the flanged clip on the foot pads.
To complete the assembly and securing of your unit, finish installing elastic ball straps completely around the
unit at the top and bottom wherever there is a grommet. Ball straps at the bottom of each side panel should
be attached to the flanged clip on the foot pads.
Lastly, attach the 4 valance tie downs from the top grommet to the bottom grommets, securing to the foot
pads using the clips on end of the straps.
FINISH ASSEMBLY OF YOUR CANOPY
REUSE
REDUCE
RECYCLE
