PREPARING CovER FoR FRAME
Using the diagram below choose the cover parts to assemble the cover to fit the frame size you have assembled.
All cover parts are labeled. The A and B labeled sides of top are used with either the 12ft wide or the 20ft wide
cover. Make sure the labels are at the same ends of frame before zipping the cover together.
Please Note: The center section of cover will zip from opposite ends when labels are correct and at one
end of frame.
ZIPPING CovER PIECES ToGEThER
Your cover sections have heavy duty zippers that are easy to zip together. To
assemble the cover size you have chosen, place the 12ft or 20ft center section over
the peak of frame. Locate the A and B sections of the cover and place on each side
according to diagram above. You can fold the A and B section upside down back
over the center section and zip the two pieces together or you can zip together by
going under the frame. Once you have zipped parts together be sure to line up and
place the Velcro flap over the zipper line to hold covers together.
