COVER & WALL ASSEMBLY
Step 9) Pull cover over frame. Make sure the peak of
the cover lines up with the peak of the frame.
Step 10) Begin attaching ball bungees to the cover
by starting at opposite corners and then attaching
the other 2 corners.
Step 11) Loop the ball bungee straps through the
grommet from underside of cover. Attach one to
each side of the frame at the corner as shown above.
Attach
First
Attach
First
Attach
Second
Attach
Second
Step 12) Once the corners of the cover are attached,
the cover will will help hold frame together. Now the
legs can be inserted.
Step 13) Lift one side of the canopy and insert the
legs into the 3 way connectors.
Step 14) Go underneath the canopy and attach Ball
Bungee Straps to each end of the cover. Be sure to
attach a ball bungee through every open grommet.