FRAME ASSEMBLY
Step 3) Assemble one side of roof frame. Make sure the bolt
holes face outward as shown and that the 3-Way fitting (3WPC)
is placed with the curved bend facing the front and rear.
Step 4) Assemble the other side of roof frame as
shown above following the same directions as in
step 3.
Step 5) Connect one side of the brace bar (Pipe D)
with the bolt and wing nut. Make sure round head of
bolt faces exterior of tent.
Step 6) Bolt the other side of brace bar to the frame.
Step 7) Make sure the round head of bolt faces the
exterior of tent.
Step 8) Set cover on one side of frame as shown.
