background image

IMPORTANT NOTICE: PLEASE READ CAREFULLY

We are confident that you will be completely satisfied with your King Canopy unit.  Please take a moment 

to read the very important information below, and call us with any questions you may have.

King Canopy/PIC America, LTD. has no control over wind, snow, ice, rain or any other weather condition and 

we are in no way responsible for any damage caused by the canopy or to the canopy. We suggest you contact 

your insurance carrier just as you would for any other outside structure.

OTHER PRECAUTIONS WHICH MUST BE FOLLOWED:

Keep all flame and heat sources away from this tent fabric.  The tent fabric will burn if left in continuous 

contact with any flame source.

DO NOT cook underneath or near canopy.

DO NOT store or use flammable liquids underneath or near canopy.

DO NOT ignite or store fireworks underneath or near canopy.

DO NOT use bleach to clean cover.

DO NOT dry clean cover.

DO NOT wash cover in washing machine or dry in dryer.  Hand wash with mild soap and water only.

DO NOT allow rain water, snow or ice to accumulate on top of cover.

DO NOT hang or suspend anything from the frame, grommets, truss system or ball straps of the unit.  

REMOVE canopy cover before a storm, or disassemble entire canopy unit if possible.

REMOVE rain water, snow and ice from canopy cover.  

This is a temporary structure and is not recommended for use as a permanent structure.

The King Canopy Atlas™ Extra-Duty Garages are designed to be one of the strongest and most well designed 

garages  in  production  today.    This  innovative  product  offers  numerous  features  and  benefits  for  the  end 

use  consumer.  Key  features  include  a  commercial  grade  PE  fabric  skylight  that  allows  sunlight  to  enter  and 

“Pass-Thru” front and rear doors that make storing automobiles, boats, ATVs or personal watercraft a breeze! 

Our patented Woven Steel™ Cable Roof Truss System is included for increased stability and durability in extreme 

weather conditions and able to withstand significantly heavier loads than frame systems that do not include 

this outstanding feature. Easy to assemble and engineered for maximum protection. 

Includes one year limited 

warranty.  (Please see enclosed instruction sheet for details.)

***The Woven Steel™ Cable System will not guarantee that your King Canopy Garage/Carport will hold heavy loads (snow 

specifically) indefinitely. Any significant snow accumulation must be removed frequently to avoid the possibility of PE fabric 

failure and steel frame collapse.*** 

Summary of Contents for AT1224S









Reviews: