GETTING TO KNOW YOUR
CORDLESS LED WORK LIGHT
FIGURE 1
ASSEMBLy
ATTACHING WORK LIGHT HEAD TO BASE
Place the base (A) Fig.2 on a flat surface. Position
the U-Shape bracket (B) of the work light head onto
the base (A) as shown in Fig.2. Use the lock knob
(C) to secure the work light head on the base.
FIGURE 2
1- Carry handle with foam
2- Aluminum housing
3- LED
4- Pivot lock knob
5- Magnetic steel base
6- High/Off/Low control switch
7- Input jack (charging)
8- 1 of 2 tilt lock knobs
9- 12V Charger
10- 120V Charger
11- Battery charging indicator light
