background image

WARRANTY INFORMATION & 

SAFETY RULES FOR WET•DRY VACUUMS

2-YEAR 

LIMITED WARRANTY

FOR THIS WET•DRY VACUUM  

KING CANADA TOOLS

OFFERS A 2-YEAR LIMITED WARRANTY

FOR NON-COMMERCIAL USE.

PROOF OF PURCHASE

Please keep your dated proof of purchase for warranty and servicing purposes.

REPLACEMENT PARTS

Replacement parts for this product are available at our authorized King Canada service centers across Canada.

LIMITED TOOL WARRANTY

King Canada makes every effort to ensure that this product meets high quality and durability standards. King Canada warrants to the original
retail consumer a 2-year limited warranty as of the date the product was purchased at retail and that each product is free from defects in
materials. Warranty does not apply to defects due directly or indirectly to misuse, abuse, normal wear and tear, negligence or accidents, repairs
done by an unauthorized service center, alterations and lack of maintenance. King Canada shall in no event be liable for death, injuries to
persons or property or for incidental, special or consequential damages arising from the use of our products. 

To take advantage of this limited warranty, return the product at your expense together with your dated proof of purshase to an authorized King
Canada service center. Contact your retailer or visit our web site at www.kingcanada.com for an updated listing of our authorized service
centers. In cooperation with our authorized serviced center, King Canada will either repair or replace the product if any part or parts covered under
this warranty which examination proves to be defective in workmanship or material during the warranty period.

ITEMS NOT COVERED UNDER WARRANTY

Accessories supplied with this vacuum such as the hose, 14” floor sweep, crevice tool, gulper tool, cartridge filter and foam filter are not covered
under warranty and are available as optional accessories at your nearest King Canada distributor.

VOLTAGE WARNING

: Before connecting this vacuum to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same

as that specified on the nameplate. A power source with voltage greater than the specified voltage on nameplate can result in SERIOUS
INJURY to the user - as well as damage to the motor.  If in doubt DO NOT PLUG IN THE VACUUM. Using a power source with voltage
less than the nameplate is also harmful to the motor. 

1. KNOW YOUR VACUUM.

Read and understand the instruction

manual and labels affixed to the vacuum. Learn its application

and limitations as well as its specific potential hazards. 

2. WEAR PROPER APPAREL.

Do not wear loose clothing, gloves,

neckties or jewelry (rings, watch) because suction force could

get them caught in the vacuum. Wear protective hair covering to

contain long hair. Roll up long sleeves above the elbows.

3. Do NOT expose to rain

, this vacuum must be stored indoors.

4. Do not handle

the electrical plug or vacuum with wet hands.

5. Never use this vacuum

with any opening blocked, keep

opening free of dust, hair, lint or anything that will restrict air flow.

6. Never vacuum anything that is on fire

, burning or smoking

such as matches, cigarettes or hot ashes. Never vacuum

flammable or combustible liquids such as gasoline, electrical

devices could produce sparks which can cause a fire or

explosion! Never vacuum toxic or hazardous materials.

7. Never use this vacuum

without filters installed.

8. Never vacuum coal ash

, cement or drywall dust without

adaquate filtration in place or you could damage the motor or the

material could be exhausted back into the air. When vacuuming

drywall dust, a high efficiency drywall filter must be used to

prevent serious motor damage. These high efficiency

accessories are available and are listed in this manual.

IMPORTANT SAFETY RULES FOR WET•DRY VACUUMS

Summary of Contents for 8560LST







Reviews: