background image

IMPORTANT INFORMATION

2-YEAR 

 

LIMITED WARRANTY  

FOR THIS 18 GA. NARROW CROWN STAPLER  

KING CANADA TOOLS

 

OFFERS A 2-YEAR LIMITED WARRANTY  

FOR NON-COMMERCIAL USE.

PROOF OF PURCHASE 

 

Please keep your dated proof of purchase for warranty and servicing purposes. 

 

REPLACEMENT PARTS 

 

Replacement parts for this tool are available at our authorized KING CANADA service centers across Canada. For servicing, contact 
or return to the retailer where you purchased your product along with your proof of purchase. Please use the 10 digit part numbers      
listed in this manual for all part orders where applicable. 
 

LIMITED TOOL WARRANTY 

 

KING CANADA makes every effort to ensure that this product meets high quality and durability standards. KING CANADA warrants to 
the original retail consumer a 2-year limited warranty as of the date the product was purchased at retail and that each product is free 
from defects in materials. Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, repairs 
or alterations and lack of maintenance. KING CANADA shall in no event be liable for death, injuries to persons or property or for                 
incidental, special or consequential damages arising from the use of our products. To take advantage of this warranty, the product or 
part must be returned for examination by the retailer. Shipping and handling charges may apply. If a defect is found, KING CANADA 
will either repair or replace the product. 

 
 
 
 
 
 
 
 
 

KING CANADA TOOLS INC. DORVAL, QUEBEC, CANADA H9P 2Y4

Summary of Contents for 8101S










Reviews: