INTRODUCTION
Congratulations on your purchase of this product. Our
range of Anti-vandal IR ‘Night vision’ Dome cameras adopt
the latest SONY CCD image sensors and drivers.
All are water-resistant, tri-axis mountable and suitable for
day & night, indoor & outdoor applications. They offer high
definition combined with image stability, strong anti-
jamming, with rich and real colours. Installation & operation
are very straight forward.
Please read this instruction manual carefully to ensure
proper use of the product
CONNECTING
PRODUCT FEATURES:
*
*
*
*
Sensor
((((
CCD
))))
SONY 1/3
"
HQ1
CCD Sensor.
*
*
*
*
Auto Gain Control (AGC)
Built-in auto gain control
(AGC)
circuit. The color camera
achieves high definition images under low LUX
*
*
*
*
Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The colour
camera’s AES speed can reach
1/100,000
s.
*
*
*
*
Gamma Characteristic
Camera Gamma characteristic
is
0.45.
*
*
*
*
Scanning Mode
NTSC
or PAL
mode.
*
*
*
*
Night-time Vision
0 LUX with IR LEDs ON. Adopts Taiwanese high quality
IR
LED’s, having excellent night-vision performance.
DC12V
Power Supply
Monitor
VDM-IR36VF
TROUBLE SHOOTING
Link wire rule
：
Power
Video
1. No Picture after power-up
. May be due to power supply voltage abnormality, please check the power
supply voltage and polarity.
. Please check all the connecting cables and monitors to ensure they are
connected correctly.
2. The camera image has flowing interference ripples
. May be caused by the power supply AC ripples, or video signal ground loop
interference.
. Check the monitor and peripheral equipment used.
3. The image background colour changes continuously
. Fluorescent lamp’s electromagnetic field may cause colour roll. This is a
recognized phenomenon with CCD cameras.
. Reduce the number of fluorescent lamps or increasing the distance between
the camera and the fluorescent lamps may improve things.
4. Picture smear is apparent
. The power supply’s voltage unstable
.
. Cables not connected correctly or have high impedance.
Notes
：
：
：
：
●
An appropriate regulated Low voltage PSU must be used. Its output
voltage
、
current
、
voltage polarity
and operating temperature
must
match the camera’s requirement
.
●
To avoid damage during lightning you must use an Anti-surge device or
turn off the power and disconnect the cable
.
Video
12V DC
To prevent fire or shock hazard. Do not expose the unit
The symbol is intended to alert the user to the presence of
The symbol is intended to alert the user to the presence of
to water for long durations.
important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.
uninsulated ‘dangerous voltage’ within the product’s
enclosure
that may be of sufficient Magnitude to
constitute
a risk of electric shock to persons.
CAUTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK
DO NOT REMOVE COVER, BANG OR KNOCK USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO OUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC. DO NOT OPEN
CAUTION:
To prevent electric shocks and risk of fire hazard,
do NOT use other than specified power source.
Note
: : : :
●
Please note the camera’s operating temperature and its using
environment. Avoid using the camera at too high or too low
temperatures. The recommended operating temperature is -5c
to +40c.)
●
Never make the camera face the sun or bright object. Otherwise,
it will damage the CCD
.
●
Do not mount the camera near by the radiator
or heater.
