kinetic T-2400 Assembly Manual Download Page 6

ADDITIONAL BIKE MOUNTING SOLUTIONS 

(Ordering & information: kurtkinetic.com)

KINETIC TRAXLE FINE

PART NO: T-2100

For fine-threaded 12mm thru-axle systems including: 

Syntace X-12, DT SWISS (Tapered and Flat) and Specialized

KINETIC TRAXLE MEDIUM

PART NO: T-2102

For medium-threaded 12mm thru-axle systems including: 

SHIMANO SM-AX75 and SM-AX65 142mm x 12mm

KINETIC TRAXLE COARSE

PART NO: T-2101

For coarse-threaded 12mm thru-axle systems including: 

RockShox Maxle, Trek APB  Maxle and others

STANDARD CONE CUP

PART NO: T-2111

SLOTTED CONE CUP

PART NO: T-2103

TRACK CONE CUP

PART NO: T-2104

SHALLOW CONE CUP

PART NO: T-2105

INTERNAL CA CONE CUP

PART NO: T-2106

BMX CONE CUP

PART NO: T-2107

Pre-installed on all Kinetic 

trainers and fits most 

nutted axles and track 

bikes.

Comes in the trainer box 

and works with many 

non-Kinetic quick release 

skewers. 

An oversized version of the 

Standard Cone Cup for track 

axle nuts larger than 15mm.

Designed with a shallow 

outside diameter to work on 

any frame with a tight drive-

side dropout tolerance.

Works with chain-actuated 

internal hubs like Sturmey 

Archer. Great for Brompton 

bikes.

For oversized 14mm bmx 

axles with axle nuts 19mm 

and larger.

www.kurtkinetic.com

Page 6

*FOR YOUR SAFETY

We recommend using the skewer that was included with your trainer. 

 

»

Be sure that your bike is correctly installed and 
securely locked into the trainer before riding.

 

»

Do not over-tighten the roller tension knob. Over-
tightening will cause both tire and unit damage. 
Tighten only enough to avoid tire slippage.

 

»

When using the trainer for normal use or for 
extended periods of time, the resistance unit 
will get hot. 

DO NOT

 touch the resistance unit 

while it is in use or while it is hot.

 

»

Always consult a doctor before beginning any 
exercise routine or using any fitness product 
including the Kinetic Trainer. Should you become 
ill, feel dizzy, light-headed or nauseous while 
riding the trainer, stop riding immediately and 
seek medical attention.

 

»

While in use, the wheel of your bike and the 
resistance unit may be spinning at high speeds. 
For this reason keep children, pets and all items 
safely away from your trainer while in use. 

 

»

Always use the trainer on a flat surface.

SAFETY WARNINGS

RECOMMENDED SKEWER AND CONE COMBINATION*

T-2111

PREINSTALLED 

ON THE TRAINER

T-740

SHIPS IN  

TRAINER BOX

ACCESSORIES 

(Available at kurtkinetic.com and Kinetic dealers)

RISER RINGS

TRAINER MATS

SWEAT GUARDS

TRAINER BAGS

TRAINER TIRES

PRO FLYWHEEL

Summary of Contents for T-2400









Reviews: