A Small Wheel Adapter is required to use
the Kinetic Trainer on bikes that have
wheels with an outside diameter (O.D.) of
22” or less. It is an optional accessory and
not included with our trainers. The Small
Wheel Adapter is available from your local
bike shop, or from our website. Go to
www.kurtkinetic.com to place an order.
To install the Small Wheel Adapter (SWA),
first remove the resistance unit from the
trainer stand. Please refer to the Kinetic
Assembly instructions on Page 2. Remove
the two mounting bolts and washers from
the SWA. Face the back of the trainer
frame. Grasp the SWA by the round tube
with the mounting arms pointing down, and
slide it down between the large pipes in the
“U” bend in the trainer frame.
Guide the SWA between the round frame tubes and the mounting arms over the resistance unit plate as shown here. Place washer on
bolt and insert through the bracket which is welded onto the trainer frame, and through the holes in the SWA. Attach second washer
and nut to bolt, tightening to secure the SWA with mounting bolt and nut as described on page 2.
small wheel adapter
4
www.kurtkinetic.com
877·226·7824
caring for your trainer
By purchasing the Kinetic Trainer you’ve made an investment in a
top-quality piece of equipment. When used according to the
manufacturer’s instructions and cared for with common sense, your
Kinetic trainer will provide a lifetime of training. Store the trainer
indoors, out of the rain and away from temperature extremes. Since
sweat is corrosive, you can extend the life of your trainer by wiping it
off after your workout.
caution
1.
When using the trainer for normal use or for extended
periods of time, the resistance unit will get hot. DO NOT
touch the resistance unit while in use or until unit has cooled
down following use.
2.
Always consult a doctor before beginning any exercise
routine or using any exercise or fitness product including the
Kinetic Trainer. Should you become ill, feel dizzy, light-
headed or nauseous while riding the trainer, stop riding
immediately and seek medical attention.
3.
While in use, the wheel of your bike and the resistance unit
may be spinning at high speeds. For this reason keep
children, pets and all items safely away from your trainer
while in use. Also be sure that your bike is correctly
installed and securely locked into the trainer before riding.
4.
Always use the trainer on a flat surface.
5.
Do not over-tighten the adjustment knob (Part E).
Over-tightening will cause both tire and unit damage.
Tighten only enough to avoid tire slippage.
Frame with
Small Wheel
Adapter
Installed
Small Wheel
Adapter
