background image

Arsenic Guard

®

 

 
OWNER’S INFORMATION 

 

11/07 

Kinetico Incorporated  

  Corporate Headquarters  

  Newbury, Ohio 44065  

  440-564-9111 

Product No. 11997A 

 

Maintenance 

Cartridge Filter 

The cartridge filter will require cleaning or replacement when you notice a drop in pressure.  To clean / 
change the cartridge filter: 

1.  Turn the system by-pass handle to the "By-pass" (yellow symbol) position. 

2.  Open the pressure relief valve on the top of the filter outlet. 

3.  Remove the filter housing by turning it clockwise with two hands, and rinse with water. 

4.  Remove and clean or replace the cartridge by turning it clockwise. 

5.  Install clean or new cartridge by turning it counterclockwise on the filter head. 

6.  Clean and inspect the housing seal near the top, and lubricate with silicone if needed. 

7.  Install the housing by turning it counterclockwise until it stops. 

IMPORTANT

 - Check alignment of arrows on housing to assure proper assembly. 

8.  Close the pressure relief valve on the top of the filter outlet. 

9.  Turn the system by-pass handle to the "Service" (green symbol) position. 

 

Filtration Media Replacement 

The UltrAsorb filtration media has a finite capacity for arsenic reduction and must be replaced 
periodically.  The frequency of media replacement is determined by influent water quality, the size of 
the media beds and your total water consumption. 
 
 
 

When to Call for Service 

Water Testing 

In order to assure system performance, the water quality must be tested periodically.  The frequency 
of testing is determined by influent water quality, the size of the media beds and your total water 
consumption.  Contact your authorized Kinetico dealer for the recommended water tests at the 
intervals suggested. 
 

UltrAsorb Filtration Media Replacement 

When the capacity of the filtration media has been reached, the media must be replaced.  Contact 
your authorized Kinetico dealer for this service. 
 

NOTE

:  Some state or local codes do not allow the use of by-pass valves on systems.  Consult your 

Kinetico dealer for information.

 

 

Reviews: