12
Elevation 1+
© 2011 Kinesys Projects Ltd
9
Menus
Four buttons are available to operate the menu system: menu, enter, up and down.
Power Up
The display briefly shows the firmware revision number.
Normal Stationary Operation
Elevation 1+ display showing address 1
Elevation 1+ display showing a position of 5752mm
The display oscillates between showing comms address and position. Position is shown
as a right justified number and address has a right justified number but with an A in the
left most character. The two displays alternate every two seconds.
Normal Moving Operation
While the unit is moving the display will only show the position.
Manual/Auto operation
To operate the unit manually press the menu and enter buttons together. The unit will
show MANUAL in the display while stationary. Pressing menu and enter again will revert
to automatic mode. When this is done AUTO will show in the display for 2 seconds
before reverting back to the normal operation outlined above. There is a 2 minute
timeout on the manual mode. This timer is reset to 2 minutes every time the unit is run in
manual mode. After two minutes of inactivity the unit will revert to automatic mode as if
the menu and enter buttons had been pressed.
