26
8.2 Source switching
Command
Function
Command feedback
HDMI.
Switch to HDMI input.
HDMI OUT SWITCH TO 1!
USBC.
Switch to USB-C input.
HDMI OUT SWITCH TO 2!
DP.
Switch to DP input.
HDMI OUT SWITCH TO 3!
VGA.
Switch to VGA input.
HDMI OUT SWITCH TO 4!
HDMIA.
Enable auto switching mode.
HDMI OUT SWITCH TO AUTO MODE!
HDMIM.
Enable manual switching mode.
HDMI OUT SWITCH TO MANUAL MODE!
FASTSWITCHON.
Enable fast switching mode
FAST SWITCHING ON!
FASTSWITCHOFF.
Disable fast switching mode
FAST SWITCHING OFF!
FASTSWITCHQUERY.
Get the status of fast switching mode.
FAST SWITCHING ON!
8.3 VGA resolution selection
When VGA source is selected, the below commands can be used to set the VGA output resolution.
Command
Function
Command feedback
VGARES1.
Set the VGA output resolution to
1024x768@60Hz.
SET RESOLUTION OF VGA OUTPUT TO
1024x768@60Hz!
VGARES2.
Set the VGA output resolution to
1280x720@50Hz.
SET RESOLUTION OF VGA OUTPUT TO
1280x720@50Hz!
VGARES3.
Set the VGA output resolution to
1280x720@60Hz.
SET RESOLUTION OF VGA OUTPUT TO
1280x720@60Hz!
VGARES4.
Set the VGA output resolution to
1360x768@60Hz.
SET RESOLUTION OF VGA OUTPUT TO
1360x768@60Hz!
VGARES5.
Set the VGA output resolution to
1600x1200@60Hz.
SET RESOLUTION OF VGA OUTPUT TO
1600x1200@60Hz!
VGARES6.
Set the VGA output resolution to
1920x1080@50Hz.
SET RESOLUTION OF VGA OUTPUT TO
1920x1080@50Hz!
VGARES7.
Set the VGA output resolution to
1920x1080@60Hz.
SET RESOLUTION OF VGA OUTPUT TO
1920x1080@60Hz!
VGARES8.
Set the VGA output resolution to
1920x1200@60Hz.
SET RESOLUTION OF VGA OUTPUT TO
1920x1200@60Hz!
VGAAUTO.
Automatically adjust VGA input’s picture
VGA AUTO.
Set VGA AUTO ADJUST!
STA.
Report system status (continued).
DIP0000!
DIP EDID0000!
SPDIF OUT ON!
IIS OUT ON!
AUDIO OUT OFF!
HELP.
Get the command list.
RS232 COMMANDS LIST:
1 - POWON
2 - POWOFF
3 - RST
4 – UNLOCK
…
