Kinderkraft LULI, Manual

Page: 23 / 72

23
move the locking button upwards (Figure L). Attention! Do not activate the rocker function if
the button is in the motion blocking position. The rocker has two belt heights. Choose one of
these depending on the size of your child.
Cushion adjustment
Adjustment is by means of a Velcro strap (Figure M). By sliding the belt buckle down, you can
adjust the cushion lower, while by pulling the belt buckle up, you can adjust the cushion higher.
Velcro straps on the adjusting belt and cushion are used to stabilize the position of the cushion.
Installation/replacement of batteries in the rocker:
To install or replace the batteries, use a Phillips screwdriver (not included), unscrew the safety
flap from element 2 (one screw) and replace the batteries paying attention to polarity. Follow
the figure K.
Product control:
You can control the rocker using the touch panel on the rocker foot (2).
When the device is turned on, the LED above the On/Off icon lights up.
Panel control (Figure K)
On/Off
Swinging speed control. Adjustment from 1 to 5.
Turn on or stop the music.
Switching songs - single click; Volume adjustment on a 4-level scale - press
and hold the button
Swinging time adjustment. Swinging can be activated for 8, 15 or 30
minutes.
Maintenance and cleaning
The seat pad, pillow and the toy bar: Clean with a clean, damp cloth and mild soap. Leave to air-
dry. Do not immerse in water.
Rocker foot: clean with a soft, clean and dry cloth.
Storage
Keep the product out of the reach of children.
Batteries should be removed from the product if it is not used for a long time to avoid corrosion
and leakage.
DISPOSAL OF WASTE EQUIPMENT