Kindcomfort KT012, Instructions For Use Manual

Page: 26 / 54

5. INSTALLING CHILD SEAT. GROUP 2.
Only suitable for Group 2, approx.
4 to 6 years (15-25 Kg.)
WARNING
1. Put the seat in position 4 (5.1).
2. Release connectors O and Q on the back of the seat and remove
the belts thereof. (5.2, 5.3 and 5.4).
3. From the front pull the harness straps towards you to get them out
of the shoulder holes, separate the belt harness protectors (5.5).
4. From the underside of the seat insert part 1 insert in the hole and
pull the buckle to remove the entire base (5.6, 5.7 and 5.8).
5. From the underside of the seat pull connectors 2 outwards to
remove the harness tapes from the base of the seat (5.6 and 5.9).
6. Lift the cover of the base of the seat, and with a screwdriver
remove the screw and remove the harness adjustment part (5.10),
removing the seat belt, remove connector Q from behind the seat
with the rest of the harness adjustment tape (5.2).
7. Place the child seat on the vehicle seat, ensuring it is pressed
firmly against the back of the vehicle seat (5.11).
8. Place the child in the child restraint seat (5.12).
9. Move the vehicle safety seat belt through the F waist guides and B
vertical guides; make sure the belt is not twisted (5:13).
10. Insert the seat belt in the vehicle anchor point and press until you
hear a “ click ” so that the child seat is properly installed (5.14).
11. Make sure the vehicle’s safety belt is not twisted, also check that
the seat cover does not impede the movement of the vehicle
safety seat belt or prevent the installation of the seat in any way.
To release the child unbuckle the vehicle safety belt as described
in the instructions.
Before installing the seat for Group 2, the seat, G harnesses, C
harness protectors, H buckle and L harness adjustment button must
be removed (5.1).
IMPORTANT
Ensure that the belt has no slack.
26 KT012 Child restraint system