3
RANGER PRO 12V AIR COMPRESSOR
4) Power Tool Use And Care
a) Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better
and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch
is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any
adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that
may affect the power tool’s operation.
If damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
g) Use the power tool, accessories and tool bits etc., in accordance with these instructions taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in
a hazardous situation.
h) The electric motor has been designed for 230V and 240V only.
Always check that the power supply corresponds to the
voltage on the rating plate.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that
the safety of the power tool is maintained.
6) Additional Safety Instructions for 12V Air Compressors
a)
When using the compressor, ensure you are parked in a safe, well lit location, off the road and with the hand brake engaged.
b)
Ensure your personal safety is not at risk and never use the Automotive Compressor while the car is in motion.
c)
Do not place the hose end against anypart of your body when turned on, as this may infuse air into your blood stream putting your health at
serious risk.
d)
Do not make any alterations to this Compressor. Only use the adaptors supplied with this product.
e)
Use this product only in accordance with operation instructions included in this manual.
f)
If the vehicle fuse is blown, only replace with identical rated fuse.
g)
Inspect each part before use. Do not use if bent, broken, melted, burnt or if the unit appears to be damaged.
h
)
Check the tyre pressure before inflating. Never exceed the suggested pressure of the item being inflated. If suggested pressure is exceeded,
the item being inflated may burst.
I)
Do not bend or pinch the air hose while the Compressor is in use.
j)
It is not suggested that the Compressor work continuously for more than 30 minutes. If 30 minutes of use has been reached, turn it off and let
it cool for 8 minutes before using again.
k)
If the Compressor is making abnormal sounds or its temperature if quite high, turn off the power straight away and let it cool for at least 10
minutes before trying again. Improper use may result in damage of the Compressor.
l
)
Do not leave unattended and operating. Keep out of reach of children.
m
)
Put the Compressor in a dry place if it is not in use for an extended period of time.
n) Keep the Compressor away from flammable liquid or gas. Do not allow the Compressor to become wet.
o) Never put the connector and adaptors into your mouth, ear or eye. They are not toys.
7) Electrical Safety
WARNING! When using mains-powered tools, basic safety precautions, including the following, should always be followed to reduce
risk of fire, electric shock, personal injury and material damage.
a) Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before operating the tool.
b) Save these instructions and other documents supplied with this tool for future reference.
c) The electric motor has been designed for 12V only. Always check that the power supply corresponds to the voltage on the rating plate.
d) If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard.
3
Summary of Contents for RANGER PRO K13010
Page 12: ...www kincrome com au...
