POWER PAK PLUS
9
Power Supply for Your 12V DC Products
1.
Connect the multi-purpose accessory cable (16) or 12V DC female adaptor (18) into the 12VDC 10A output port (6).
2.
Connect the other end of the multi-purpose accessory cable (16) or 12V DC female adaptor (18) into your chosen 12V
vehicle accessory (fig5).
3.
Turn the POWER PAK PLUS ON the by pressing the ON/OFF/TEST button (9).
4.
Once you have finished using your 12V accessory remove the multi-purpose accessory cable (16) or 12V DC female
adaptor (18) from your accessory and the POWER PAK PLUS.
Note: Running of the your device will very depending on the devices input requirements & charge status of the
POWER PAK PLUS.
LED Torch Emergency Light
1.
Press and hold the ON/OFF/TEST button (9) for approx. 3 seconds to turn ON the LED torch/emergency light (1).
2.
To change the LED torch/emergency light (1) mode from torch to STROBE LED mode press the ON/OFF/TEST Button (9)
once again, and finally for SOS LED mode press the ON/OFF/TEST Button (9).
3.
Turn OFF the LED torch/emergency light (1) feature by pressing the ON/OFF/TEST Button (9) again.
Composition and amount of toxic and harmful substance in POWER PAK PLUS
O
: Indicate all homogeneous materials hazardous substances content are below the MCV limit specified in the
Standard 2002/95/EC (RoHs).
Pb
O
Hg
O
Cd
O
Cr(Vi)
O
PBB
O
PBDE
O
(fig 5)
